Residential, Commercial, Industrial Plumbing Services | Benicia Plumning

People Taking Care of People

707.745.2930

What's Wrong with Your Dishwasher?

What's Wrong with Your Dishwasher? | Residential, Commercial, Industrial Plumbing Services

Once you move on from hand-washing dishes, there’s really no going back. So when the dishwasher starts having problems, there’s no time to waste in getting to the bottom of it. You can always call us at Benicia plumbing -- and for some problems, you definitely should -- but there are some small, common dishwasher problems that you can diagnose, if not repair, all on your own.

Identifying and Fixing Leaks

Dishwashers are designed to not spill a drop, but leaks can develop if certain parts malfunction or become damaged. If you have an older dishwasher, some parts may be failing due to age and wear, which can also lead to leaks.

If you notice pooling water or signs of water spray around your dishwasher, it could be coming from one or more of three areas:

Around the door. The door is lined with a rubber gasket, much like the one on your refrigerator door. If there is a tear in the gasket, or if it has become cracked and brittle with age, this could be the source of your leak.

At the water source. A hose or pipe carries water from your household plumbing to your dishwasher’s water inlet. If this connection is loose or if a gasket has failed, water could be leaking from this area.

Underneath the dishwasher. There are three places a leak can occur under here: the water inlet, the drain and the seal around the pump. Leaks in these places can be caused by loose or failed hose clamps, cracked gaskets or a broken pump.

To get a good look around, you may need to clear out the area under your kitchen sink and remove the front kick plate of your dishwasher. Use a flashlight to look everywhere for the source of the water. If your dishwasher isn’t mounted to your countertop or cabinets, you may be able to scoot the dishwasher away from the wall to get a better look. Be careful not to snag or break any hoses if you do this.

If you’re lucky, you may be able to pin the source down to a loose connection -- something you can fix in under a minute. If it’s a failed gasket or pump, check your dishwasher manufacturer’s website for information on replacement parts and DIY repairs. You may find the instructions for these repairs surprisingly simple, and if it ends up being something you don’t want to handle yourself, your local plumber can always step in to make it a quick fix.

When Your Dishwasher Stops Doing Its Job

Having a water leak is troubling enough, but your dishwasher is truly useless when there’s no water at all. And as with leaks, there are a few different common ways that this problem can occur:

The float switch is stuck or broken. The float switch is usually a plastic disc or cone that is attached to the floor of the dishwasher and is able to move up and down a few centimeters. When enough water has filled the dishwasher, the rising float switch is supposed to tell the dishwasher to stop the water flow. But if the switch gets stuck in the “up” position by soap scum or a fallen fork, no water will flow at all. This switch can also break, in which case it will need to be replaced.

The door sensor is stuck or broken. All dishwashers have a safety mechanism to prevent the flow of water when the door is not latched. If your latch isn’t “clicking” into place when you close the dishwasher, there could be a fallen object or some type of residue obstructing the latch. If the latch is functioning properly, it’s possible that the electronic switch that controls the water flow is broken and must be replaced.

There’s an issue with the water supply. If you have water in the sink, you know the problem isn’t the main supply. The next thing to check is the valve under the sink that diverts water to the dishwasher. If that’s open, follow the supply hose to make sure it isn’t kinked. You may need to remove the dishwasher’s kick plate to see the full length of the hose.

About Benicia Plumbing

At Benicia Plumbing, we follow our stringent Code of Conduct which states that we will always be friendly and professional, and that every customer will be greeted by the friendly voice of a knowledgeable, experienced and highly-skilled Benicia Plumbing professional. We also pledge to be punctual and courteous, where each client will be served promptly with a polite demeanor and respect. In addition, your Benicia Plumbing technician will always arrive at your location equipped and prepared to resolve your problem seamlessly and by devising the ideal solution for you and your budget.

Sources: DIY Network and USA Today

Ed Attanasio | Trust Ed Advertising

Written by Ed Attanasaio
TrustEDadvertising

 

Comments

Leave a comment

This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.

Math question:

Solve this simple math problem and enter the result in the box. E.g. for 1 + 3, enter 4.

Post Info:

Published on:
10/12/2018

Post by:
Admin

Category:
Did you know

Tag(s):
#Benicia plumbing
#Dishwasher
#Hand-washing dishes
#Household plumbing
#Leaks

Back

All Blogs