Residential, Commercial, Industrial Plumbing Services | Benicia Plumning

People Taking Care of People

707.745.2930

Service Request

Spring into Action for Plumbing Preventative Maintenance

Spring into Action for Plumbing Preventative Maintenance | Residential, Commercial, Industrial Plumbing Services

Spring is a great time to check your home's plumbing systems and perform preventative maintenance to protect your home against plumbing problems. At Benicia Plumbing, we know that by staying on top of your plumbing's maintenance, you can avoid further expensive repairs in the future, so here are some basic spring plumbing maintenance tips: 

Drains

  • Ensure that all drains have strainers to prevent debris from clogging your drain lines.
  • Pour about a gallon of water into infrequently used drains (including floor drains) to fill the trap and prevent odors from entering the house. Slow floor drains should be snaked to ensure they will carry away water quickly in the event of a flood.

Sump Pumps

  • Test your sump pump for proper operation. Pour approximately 5 gallons of water into the basin of your sump pump. Pour slowly until the sump pump turns on and begins to pump out the water. Do not pour in more water than the basin will hold. 
  • Expect the sump pump to begin pumping out water when the water level reaches approximately 8 to 12 inches below the surface of the basement floor.

Plumbing Fixtures

  • Check faucets for drips or leaks and repair parts as needed to save water
  • Clean mineral deposits from faucets and shower heads. Unscrew them and soak them in vinegar overnight
  • Cycle water supply valves under sinks and toilets to prevent them from sticking

Appliances

Washing Machines

  • Washing machine hoses should be inspected for leaks or bulges. If the hoses are older than 10 years, they should be replaced. Consider using braided stainless steel hoses rather than rubber hoses.

Toilets

  • Check your toilets for cracks or leaks. Add several drops of food coloring to the tank. If color appears in the bowl after 30 minutes, it has a leak that should be repaired.
  • If the toilet handle has to be held down in order to flush properly, or jiggled to stop from running, you may need to replace the tank parts.

Water Heaters

  • Check the temperature setting on the water heater. It should be set no higher than 120°F to prevent scalding and reduce energy use.
  • If you have a tank water heater, drain several gallons from the water heater tank to flush out sediment that can cause corrosion and reduce heating efficiency. Tankless water heaters should be flushed to remove mineral deposits. Always check with your water heater manufacturer for specific instructions regarding maintenance of your specific make and model.
  • Ensure there are no flammable materials stored near the water heater or furnace.

About Benicia Plumbing

When you do business with Benicia Plumbing, you can count accountability, punctuality, transparency and quality and that is our non-negotiable promise. From the first interaction through the successful completion of any project, you can be certain that Benicia Plumbing, Inc. will endeavor to do everything it can to make your experience the best it possibly can. You can also rest assured that Benicia Plumbing will always maintain the necessary licenses and insurance coverage required by the State of California, and when your job is completed, we will always leave the job site cleaner than when we got there.

Sources: YouTube and AOL

Ed Attanasio | Trust Ed Advertising

Written by Ed Attanasaio
TrustEDadvertising

 

Comments

Leave a comment

This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.

Math question:

Solve this simple math problem and enter the result in the box. E.g. for 1 + 3, enter 4.

Post Info:

Published on:
03/18/2019

Post by:
Admin

Category:
Plumbing tips

Tag(s):
#Benicia Plumbing
#Clogging your drain
#Plumbing Fixtures
#Plumbing maintenance
#Plumbing problems
#Sump Pumps
#Toilets
#Washing Machines
#Water Heaters

Back

All Blogs